Tech Tips: BMX Pegs - Materials and Installation 23
BK runs you through everything you need to know about pegs on your BMX bike.
GlennPPMilligan 9/9/2009 9:56 PM
BK runs you through everything you need to know about pegs on your BMX bike.
GlennPPMilligan 9/9/2009 9:56 PM
Login and add your comment
23 comments newest first
poly pegs or classic alluminum?
what about cromoly pegs?
wow.i almost thught i needed to buy pegs until i saw this.thank vitalbmx,thank you
more tech tips more tech tips!
ive been using G-sport PLEG's for a year now. I replaced each sleeve once. I love them. Havent needed a block of wax yet! Being able to grind EVERYTHING is well worth needing to replace the sleeves.
when are you going to make a tech tip on hub guards
Thanks for the advice nathans#1fan. I think i'll try the g sport hub guards. Look a little expnsive but better than breaking spokes all the time. I have profile mini ss hubs and the spokes are in such bad shape. I think the g sport guard will work.
freecoaster - if I only had one peg I would run it back non-drive side. feebles and luc-e's are my favorite grinds :D
My pegs are on the wrong side. Help BK, HELP!
if you had one peg, where would you ride it?
Back, because u can do feebles
great video. this one is for mfreestyle_2000 i ride the primo binary pegs. these things are great. they are made of 4150 chromoly and weigh 7.6 oz each. as far as hub guards go i would get the g sport pland. the are made of plastic and attaches to the spokes with zip ties. so let me know what u think.
I love the tech tips.
I ride demolition pegs for like six years..
I was looking foreward to some names of good pegs to buy. Same with hub guards. any suggestions?
"when ur on the grind"
LOL
it's funny to me that BK is so intense, almost angry, in his video parts when he's riding, but he seems like such a nice dude when he's just chilling.
sadly you fogot to mention the use of washers!! on smaller dropouts or forks you will deform plastic pegs if you dont put a washer either side of the peg.
A lot of riders that grind on the right run a left side drive hub so the whole sprocket set up is on the opposite side. You may mess it up how it is right now if you're falling on it a lot, but it should be fine if you manage to keep your pegs on whatever you're grinding!
when i grind i jump to the right side.. thats also where my sproket is.. would i have to move my sproket to the other side so i dont mess it up?? or is it good where it is???
brain likes his eclat SLOTMACHINE pegs by the looks of it