Related:
Create New Tag
Cmxx Cmxx
1/6/2014 6:29 PM

Anyone have any tips for priming? I just laid a thick coat and it's uneven in some places so I'm going to sand it down tomorrow. After that I plan on adding another coat of primer. Any tips on getting it even?

| Quote
HardBMX_Tim HardBMX_Tim
1/6/2014 6:49 PM

Clean the metal with a chemical (hydrogen peroxide, nail polish remover, paint thinner) and let that evaporate. The coat it LIGHTLY every 15-20mins.

Ffs. Theres instructions on the can, use them.




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


| Quote
Collin_McClenahan Collin_McClenahan
1/6/2014 7:02 PM

Paint, sand, paint, sand paint, sand. repeat as often as you'd like

"Let it be heard: FOUR IS BACK MUH FUCKAZ"
Refs: Mobking, four, tomdon, Sickdude, xxOhioanxx onetrykid Krisner BMX
FBM Pizza Beer Roast Machine

| Quote
Brayden_Buckingham Brayden_Buckingham
1/6/2014 7:41 PM

Raw the frame with sandpaper , use paint - remover overtop. Then , depending on what colour you use (say , matt green for example) spray a light WHITE base coat. Then spray 2 light coats of green , followed by one last one in decent amount. Then just clear coat evenly and you should be good !

Instagram : braydenbuckingham
My Cult 2 Short

| Quote
element4all element4all
1/6/2014 10:27 PM

light sandpaper. stripper. scrape it off. maybe more stripper. wipe down. light grit sandpaper. wipe down. let dry. then about 3 light coats of primer. be sure to hold the can about a foot away from it so its not heavy in one spot and runs. space each coat out about 20 minutes or so. depending on temp/humidity that day. after its completely covered. let it sit over night before you apply any other paint to it. to ensure it is DRY.


just be patient

"Forget 'today', 'today' is just tomorrow, disguised as yesterday"
TRANSPORTATION CHECK
Refs: ThrowAfit, 2funny4u, ridebmx456, spikez5, irideafly and a bunch of others, I'M LEGIT.
email= element4all@yahoo.com
facebook.
Instagram

| Quote
dave lawrence dave lawrence
1/7/2014 6:10 AM
HardBMX_Tim wrote:

Clean the metal with a ...more

This. Keep an even distance away from it while spraying, and GO SMOOTHLY, do not speed up/slow down your movement, flow your movement.

Light coats are best.

"Hey anybody ever make that mistake like right when you wake up in the morning and you believe in yourself?" -Kyle Kinane

"BIKES!" -Tom Segura

| Quote
adamnmexican adamnmexican
1/7/2014 11:47 AM

Go slow on a warm sunny day. Nice even coats. Or just leave it raw or ratty

It’s all bmx

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry

See All Deals »

THE SHOP