Related:
Create New Tag
ThugLifeBmxRiderz ThugLifeBmxRiderz
10/12/2013 2:07 PM

I have 48 spline 1664 cranks and they won't come off.... I pulled and pulled. I screwed in a bolt and hammered it like no tommarow that's all I've tryed but is they any other way with out a crank removal device?

Bang Bang bmx

| Quote
Mikel8149 Mikel8149
10/12/2013 2:13 PM

will they wiggle at all? I have no clue just keep on banging on them with a hammer if you don't want them. Try to use wd40 or something like that???

Check out my youtube channel!! http://www.youtube.com/user/mikel8149

| Quote
handlebar-to-face handlebar-to-face
10/12/2013 2:15 PM

Have to tried using a metal hammer? usually thwy work better then a rubber mallet but you have to cover the cranks with like a towel or something so you dont fuck them up

Murica bike check
REFS four, tomdon, bmx1995, jared42069, obiwan chromoly, hate breeder, nshs2010, asilva23, rascio,
Alfred NYC, Kymike, chuck8273(kind of), tc86, Ugot2dewitt, LLURider, dprc, ecuadevil, scramhype, Mario.villegas90(X2), dirtstars22, Brian_Griffin

| Quote
jj0996 jj0996
10/12/2013 2:22 PM
handlebar-to-face wrote:

Have to tried using a ...more

i use a socket extension and a metal hammer and i hammer on the end of the spindle with the socket extension

MIDWEST MOTHER FUCKER

Bike Check
Bought from Tomdon, and ScramHype

| Quote
BNC BNC
10/12/2013 4:36 PM

jump on the pedals then flip it back over and they should come off.

| Quote
ThugLifeBmxRiderz ThugLifeBmxRiderz
10/12/2013 4:43 PM

I hammered the shit out of them and pulled like my life depended on it and no theirs no wiggle

Bang Bang bmx

| Quote
handlebar-to-face handlebar-to-face
10/12/2013 5:07 PM
ThugLifeBmxRiderz wrote:

I hammered the shit out of ...more

Did you weld them on hahaha

Murica bike check
REFS four, tomdon, bmx1995, jared42069, obiwan chromoly, hate breeder, nshs2010, asilva23, rascio,
Alfred NYC, Kymike, chuck8273(kind of), tc86, Ugot2dewitt, LLURider, dprc, ecuadevil, scramhype, Mario.villegas90(X2), dirtstars22, Brian_Griffin

| Quote
biggybuggy biggybuggy
10/12/2013 5:12 PM

Pictures would make this easier.

| Quote
Mikel8149 Mikel8149
10/12/2013 5:14 PM

you could cut them off with a saw...

Check out my youtube channel!! http://www.youtube.com/user/mikel8149

| Quote
theprophet theprophet
10/12/2013 6:22 PM

grease the threads better next time? use a crank puller?

| Quote
HardBMX_Tim HardBMX_Tim
10/12/2013 6:51 PM

Its important that you use a crank tool to install the cranks. Tapping them on can push them on unevenly and ruin the splines, making them impossible to take off. Also grease you're spindle atleast once a month, eventually that grease can lose its ability to prevent bonding between the spindle and crank.




Refs : SnM An1mal, GThompson121, Chuck8273, blizzbikes, bmxsteve99, kevin.brock.338, zinum, Brian_Griffin, billyhandyjunior, riverM, tomdon
Instagram : @timhankinsbmx


| Quote
sundaybmxRR sundaybmxRR
10/12/2013 6:54 PM
HardBMX_Tim wrote:

Its important that you use ...more

This. I had some kid come into the bike shop cause his weren't pressed on right & caused them to look bent, or on the wrong spline, but it was really just overlapping splines

Spray some WD40 down in there & let it sit over night or for a few hours AT LEAST. Let it work it's way into the splines & then try beating it out again.

| Quote
ThugLifeBmxRiderz ThugLifeBmxRiderz
10/12/2013 6:58 PM
HardBMX_Tim wrote:

Its important that you use ...more

sundaybmxRR wrote:

This. I had some kid come ...more

I didn't put them on they came on the bike.. Ok I'll try that theirs a little gap that I could put it in and no I didn't weld them on so ya I'll try wd40 itLl help with the rust to

Bang Bang bmx

| Quote
ThugLifeBmxRiderz ThugLifeBmxRiderz
10/13/2013 1:48 PM

The cranks move an inch then just stoped

Bang Bang bmx

| Quote
Brayden_Buckingham Brayden_Buckingham
10/13/2013 2:46 PM

Yeaup. WD40 that bitch and it should help

Instagram : braydenbuckingham
My Cult 2 Short

| Quote
handlebar-to-face handlebar-to-face
10/13/2013 2:56 PM
Brayden_Buckingham wrote:

Yeaup. WD40 that bitch and ...more

This, soak em in it as much as you can and it will start to work

Murica bike check
REFS four, tomdon, bmx1995, jared42069, obiwan chromoly, hate breeder, nshs2010, asilva23, rascio,
Alfred NYC, Kymike, chuck8273(kind of), tc86, Ugot2dewitt, LLURider, dprc, ecuadevil, scramhype, Mario.villegas90(X2), dirtstars22, Brian_Griffin

| Quote
ThugLifeBmxRiderz ThugLifeBmxRiderz
10/13/2013 3:55 PM
Brayden_Buckingham wrote:

Yeaup. WD40 that bitch and ...more

handlebar-to-face wrote:

This, soak em in it as ...more

Saiid fuck it went to the bike shop and my friend did it for free he also broke my chain

Bang Bang bmx

| Quote
isnowyaznV2 isnowyaznV2
10/13/2013 4:26 PM
ThugLifeBmxRiderz wrote:

Saiid fuck it went to the ...more

As in actually broke your chain or took it off with a chain breaker?

Latest Bike Check/Update





Bought from: adam1234, tomdon (2), oscarbmx, the balt, smokesmokesmoke

| Quote
ThugLifeBmxRiderz ThugLifeBmxRiderz
10/13/2013 4:38 PM
handlebar-to-face wrote:

This, soak em in it as ...more

ThugLifeBmxRiderz wrote:

Saiid fuck it went to the ...more

isnowyaznV2 wrote:

As in actually broke your ...more

Chain breaker

Bang Bang bmx

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry

See All Deals ยป

THE SHOP