upnsmoke

upnsmoke

Lives in: Fallston, MD USA

Member since: 11/07/18

Recent Activity Filter:

Added reply in a thread Can I Isolate the "Hop" Part of a Bunny Hop for Practice? 9/21/2020 9:23 PM

Fortyseven, I have an instantgram. Never used it for anything, but this may be a good excuse to play around with it. My daily driver is an 89 sr5 Corolla with a stock 1.6 and an automatic. Slow as hell, but has koni’s gc coils, and Dunlop star specs. ... more »

Added reply in a thread How did people ever ride Bob bars? 9/19/2020 1:25 AM

Sent me down memory lane with that post. For real, I had a slow day at work and spent about half my shift lost in youtube world looking at bmx vids from 10 or 15 years ago. Lol, good stuff.

Added reply in a thread Can I Isolate the "Hop" Part of a Bunny Hop for Practice? 9/18/2020 8:12 PM

^Hell yeah! You’ve got good taste in parts. I see Edelbrock stuff. Hang onto that Bronco. The older gens getting harder to find these days.

Added reply in a thread Can I Isolate the "Hop" Part of a Bunny Hop for Practice? 9/18/2020 10:11 AM

I'm liking these newer Fords. On of these might make a nice little daily driver when I stop being cheap and fooling with all this old stuff. For now though, I do have a little Ford project of my own. It's a 2.3 4cyl, with a little more compression than

... more »

Added reply in a thread Primo balance hubs breaking 9/17/2020 3:14 PM

Dude says racist things. Gets called out on it. Dummy defends it and tries to say people are racist for calling him racist. Never ending loop of common sense vs I'm not admitting I'm wrong ensues. That's what I got from skimming over it, anyway.

Added reply in a thread The "I went riding today" -thread 9/14/2020 10:53 AM

I got some Pro Tec elbow pads that I have been really happy with. I have been wearing them almost any time I ride lately. They are slim enough not to be in my way, but actually do soak up a little bit of a hit. I slipped a pedal and crashed at the track ... more »

Added reply in a thread The "I went riding today" -thread 9/12/2020 7:33 PM

Ouch, man. I can't laugh at you, though, as I know the feeling. I'm usually pretty good about getting my feet down when I loop out of a manual, but the other night I slipped on wet asphalt and down I went. Hurt my ass and got myself all wet. No more ... more »

Added reply in a thread My son wants to race 9/9/2020 7:33 PM

The brakes on the 20" won't likely reach an 18" rim. The crank length would also be something to consider. Jmz313 is more knowledgeable than me on the subject, so I'd wait for his input to make a final decision. If the 20" is too big as it is, though, ... more »

Added reply in a thread My son wants to race 9/9/2020 4:36 PM

You'll be fine. If you have worn out old tires it would pay to track down some new ones if you can get them in time. That aside, 25/9 and whatever bike you have is absolutely fine for getting started in racing. The competition of racing has definitely ... more »

Added reply in a thread My son wants to race 9/9/2020 9:11 AM

Some tracks have loaner/ rental bikes. This way he can get on them and do some riding and you will be able to get a good idea exactly what size he needs. If you can find something used, as long as it isn't too small, or way too big, I imagine you can ... more »

Added reply in a thread The "I went riding today" -thread 9/9/2020 8:05 AM

Thanks man. My issue with the pictures was I just couldn't find a way to show how awesome that dirt park is. There are also miles of trails as it is part of a state park, and I want to check them out, but even when I go there on the mtb, I start out ... more »

Added reply in a thread Tricks with closed eyes??? 9/8/2020 4:12 PM

There was a 25 year old guy walking on a tightrope… Across a deep river gorge while half way around the world another 25 year old guy was getting a blow job from a 70 year old woman. BUT at the exact same moment both men were thinking the exact same ... more »

Added reply in a thread How bad is this? If at all 9/8/2020 11:42 AM

I think you are correct about the tubing. HREW, CREW (hot/ cold roll electric weld), which have a welded seam vs DOM (drawn over mandrel). To the best of my recollection, which isn't worth a lot, DOM is more expensive, can be made thinner than welded ... more »

Added reply in a thread Any tips on adjusting to riding trails? 9/8/2020 11:19 AM

^That's pretty wild. I never would have thought to do that. Definitely would make some of the big jumps less intimidating. OP, just try it when you are already having a good day. If you can get it done on the mtb, you'll be able to get it done on anything ... more »

Added reply in a thread The "I went riding today" -thread 9/8/2020 11:04 AM

Spent some time in the dirt park on the way home from work this morning. Had the place mostly to myself. I've hardly been there at all this year between covid closing it down and rain saturating us most of the summer. I'm a little rusty with jumping.

... more »

Added reply in a thread 1st real ride since the surgery. 9/8/2020 10:33 AM

Good to see you back on the bike. Your riding vids are great and I hope you keep them coming. That said, don't rush yourself back into anything. The skill doesn't go away. It's like riding a bike.

Added reply in a thread Crossroads 8/30/2020 11:36 PM

Funny timing, I just finally made it out to my first race of the year yesterday. Riding an old GT frame from the 90s. I’m not fast, but I made it to the main and had fun. racing and freestyle are obviously different, but there are skills the translate ... more »

Added reply in a thread Surface rust on your bike 8/30/2020 11:08 PM

A little bit of missing/scuffed up paint wouldn’t bug me. Just shows the bike gets ridden. I hate rust though. I’d probably end up sanding and touching it up like cky199 says.

Added reply in a thread Rotten Banana 8/21/2020 11:06 PM

Overall, I think it looks a lot better assembled than I thought it would just looking at the bare frame. It’s different, so objective accomplished I guess. It’s just a quick spray deal, no primer or clear. When it gets too beat to hell, I’ll do something

... more »

Started new thread Rotten Banana 8/21/2020 10:34 PM

Apologies in advance if this post is all jacked up. Not at home and using my phone. I bought some new parts for my VHS, and wanted to do something with the take off parts. I had this old aitken frame laying around for years and been wanting to do something

... more »

This forum thread has 2 replies